Installation videos provide a step-by-step guide on how to install your
roller shutters.
Follow this guide to select the installation video suitable for your wall
type and drive type.
A printable version is also available for download after the selection
process is complete.
Click Next to start...
1: Select your Wall Type
Brick Weatherboard / Cladding
Precast Concrete Rendered Blueboard / Foam
2: Select your Installation
Type
Face-fit In-reveal
3: Select your Drive Type
AC Electric Motor DC Battery Motor
4: Do you need to use Packing
Profile ?
No Yes
5: Do you need to have separate
Shutter Stops?
No Yes
Click next to see the installation videos...
Please ensure
you have thoroughly read and understood these instructions
and the safety notes before commencing installation.
Before starting, make sure that the roller shutter in the
package has not sustained any major transport damage, and
if so, photos must be taken and sent to us via email or
post.
The safety and installation instructions must be followed
accurately. Failure to do so will result in a void warranty.
Safety Notes
These instructions
are designed for you to easily install your roller shutter
using simple tools. However, call us on 1800 633 136 if
you are in any doubt about how to install and operate the
roller shutter or about any safety issues.
The wiring of 240 V AC Electric Motors should be conducted
by a qualified electrician according to local and national
standards and regulations.
Wear personal protective equipment before you start to help
avoid self-injury. For example: safety glasses, safety boots,
ear plugs, hard hats, long sleeves, gloves, etc.